Manufacturer: Tokyo Devices
Tokyo Devices IWCS019
This enclosure is compatible with various module products from Tokyo Devices. It comes with a flange, making it easy to attach to a wall or board. Flame-retardant ABS (UL94V-0 compliant)
Tokyo Devices IWS520-USB
A general-purpose distance sensor with USB connection. Ultrasonic waves measure the distance to an object 0.3 to 5 meters in front of you in real time. Free development software makes it easy to integrate into your system.
Tokyo Devices IW1708-24V
IW1708-24V is a charge controller that charges a lead-acid battery with solar panel power. Equipped with a step-up MPPT circuit, you can extract electricity from the solar panel even in the morning and evening and in bad weather. 24V only.
Tokyo Devices TDFA30203-24V
A simple RS232C controlled relay board. Can turn on/off voltages up to 250V AC/28V DC and currents up to 6A.
Tokyo Devices IW7011-CS
IW7011 is a cable tester for inspecting the quality of USB cables. By measuring the internal resistance of a cable, you can determine the stability of power supply and charging efficiency.
Tokyo Devices IW1270-X5
IW1270-X5 is a step-up power supply module that supports a maximum switching current of 5A. It supports an input voltage of 3.3-20V, and the output voltage can be set arbitrarily from the input voltage to a maximum of 24V.
Tokyo Devices TDFA50607
The TDFA50607 is a 7-channel USB digital I/O output board. It allows you to output 12/24V signals to various external devices using simple commands. Thanks to electrical isolation, it offers excellent safety and noise immunity.
Tokyo Devices IWPB2-FT
This is a heart rate probe that comes standard with the "Pulse Lab" heart rate sensor development kit. It is a type that clips onto the index finger.
Tokyo Devices TDFA1104
The TDFA1104 is a USB-connected, general-purpose 7-segment LED display. It can display arbitrary characters and numbers from Windows or Linux systems, making it ideal as a highly visible display for embedded applications.
Tokyo Devices IWT1320-USB
IWT1320-USB is a general-purpose slider type input device. You can get the position of the knob in 256 steps. Compatible with Windows and Linux.
Tokyo Devices IW1205K-1209
IW1205K is a power supply kit that can supply USB power 24 hours a day, 365 days a year by combining a solar panel and storage battery. Compatible with single board computers such as Raspberry Pi.
Tokyo Devices IWT2010-CS
This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.
Tokyo Devices TDFA6032A
TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.
Tokyo Devices IWAC9-1.3
10W class AC adapter with 9V 1.3A output. Compatible with Tokyo Devices' 9V input products.
Tokyo Devices APS05-AK
A.P. Shield 05 is an Arduino shield kit for creating devices using heartbeat. By simply placing your finger lightly on the infrared sensor mounted on the shield, you can read the waveform corresponding to the heartbeat using Arduino.
Tokyo Devices IW7901-AP
IW7901 is a phase detection experiment module based on inductance measurement. It is equipped with the basic functions of a lock-in amplifier, such as reference signal generation, lock-in, and signal amplification.
![Milliohm Meter, Battery Tester, Internal Resistance Meter, I2C Bus, 1.0-1500mΩ, 2.7-16V [Connector Type]](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBbUFDIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--ca69b22f2ebc37d51056bf32147aea1c72348e33/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/IW7817-CS-1.jpg "Milliohm Meter, Battery Tester, Internal Resistance Meter, I2C Bus, 1.0-1500mΩ, 2.7-16V [Connector Type]")
Tokyo Devices IW7817-CS
IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.
Tokyo Devices TDAC-THC1
This is a K-type thermocouple probe compatible with the Tokyo Devices TDSN7400. It can measure temperatures ranging from -40 to 510°C, making it ideal for measuring liquids, gases, and surface temperatures.
Tokyo Devices TDSN3820
TDSN3820 is a USB device and software kit for measuring and visualizing noise contained in 100-250V commercial power supplies.
Tokyo Devices TDSN7502
TDSN7502 is a general-purpose sensor unit for connecting a 4-wire load cell to USB. It enables real-time weight measurement from Windows or Linux systems.