RS232C Serial Relay Controller, 3 Form C , 6A 250VAC 28VDC max., 24V Power

• Uses components from reliable manufacturers, including TE Connectivity's relays and Phoenix Contact's terminal connectors.
• The 3 Form C contacts provide NO (Normally Open), NC (Normally Closed), and COM (Common) terminals. They can connect loads up to 250VAC/28VDC at 6A.
• The 24V power supply can be provided either through an AC adapter jack or terminal connectors.
• It can be connected easily with simple command operations, compatible with Windows, Linux, and PLCs.
• By using "TD-AppKit", control can be done through a window interface instead of commands (Windows only).

How to Use

Send the command string SF00000000X followed by a newline character. The X should be a digit from 0 to 7. This digit represents the state of the three contacts as a binary value from 000 to 111b. Upon successful execution, a period character . followed by a newline character will be returned.

 SF000000001(\n)　← Contact #1 will be ON
 .

 SF000000000(\n)  ← All Contact will be OFF
 .

 SF000000007(\n)  ← All Contact will be ON
 .

It is also possible to set the default state of the device at power-on and other configurations. For more detailed information, please refer to the datasheet and manual.

Additional Requirements

• 24V power supply
• RS232C straight cable

Note

• Custom orders for 5V is also possible. Please contact us for inquiries.