All products

TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.

IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

IW1708-24V is a charge controller that charges a lead-acid battery with solar panel power. Equipped with a step-up MPPT circuit, you can extract electricity from the solar panel even in the morning and evening and in bad weather. 24V only.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

ES920LRシリーズの外部アンテナタイプに対応した同軸ケーブル(防水)です。技適取得済みです。

This is an antenna (waterproof) compatible with the external antenna type of the ES920LR series.

ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).

ES920LRシリーズの外部アンテナに対応した同軸ケーブルです。技適取得済みです。

This antenna is compatible with the external antenna type of the ES920LR series.

IWT313-USB is a relay control module with USB connection. Compatible with on/off of DC12V, DC24V, AC 100V, etc. It can be easily controlled from Windows or Linux using a dedicated command line interface.

This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.

10W class AC adapter with 6V 1.8A output. Compatible with Tokyo Devices' 6V input products.