Products by Tokyo Devices

This board module reads 5-24 V digital voltage signals via Modbus. It can be read easily from PLCs, industrial PCs, and similar host devices.

TDFA60350 is an analog output unit that outputs a 0-5V voltage signal from USB. Output voltage can be controlled in 4,096 steps using control commands compatible with Windows and Linux.

IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

TDSN7200 is a general-purpose RS232C/Serial sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time.

A general-purpose distance sensor with USB connection. Ultrasonic waves measure the distance to an object 0.3 to 5 meters in front of you in real time. Free development software makes it easy to integrate into your system.

Milliohm meter using the AC four-terminal method, ideal for monitoring battery degradation.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

The IWT504-3V3 is a power module that outputs 3.3V stabilized for 24 hours using a combination of solar cells and supercapacitors. Supports output current up to 300mA.

This kit is used to mount Tokyo Devices' board products onto DIN rails.

IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.

IW1708-24V is a charge controller that charges a lead-acid battery with solar panel power. Equipped with a step-up MPPT circuit, you can extract electricity from the solar panel even in the morning and evening and in bad weather. 24V only.

IWT313-USB is a relay control module with USB connection. Compatible with on/off of DC12V, DC24V, AC 100V, etc. It can be easily controlled from Windows or Linux using a dedicated command line interface.

This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.

IW8990-C24 is a module that prevents over-discharge of 24V (12V 2 series) lead-acid batteries.

TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.

TDFA50507 is a 7-channel USB digital IO output board. 12/24V signals can be output to various devices with simple commands. With electrically isolation it has safety and noise resistance.

This is a front panel to improve the visibility of the TDFA1104.

The TDFA1104 is a USB-connected, general-purpose 7-segment LED display. It can display arbitrary characters and numbers from Windows or Linux systems, making it ideal as a highly visible display for embedded applications.

A simple RS232C controlled relay board. Can turn on/off voltages up to 250V AC/28V DC and currents up to 6A.