TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.

Features

• The TDPC201 series supports high-speed 480 Mbps thanks to the latest ADUM3166 from Analog Devices.
• It can be used with devices that traditional USB isolators did not support, such as high-quality audio DACs and measurement equipment transferring large volumes of data.
• Connect an external power source to the secondary USB Type-C connector for use. For devices with low power consumption, consider the bus-powered TDPC2011.
• Offered as a compact board module covered in resin.

Differences between TDPC2010 and TDPC2011

While TDPC2010 and TDPC2011 have the same isolation specifications, the way they supply power to devices differs. - TDPC2010 uses a self-power method, supplying power externally. It does not operate on its own. Please prepare a USB power supply with sufficient output for the secondary side device's current consumption and connect it to the Type-C connector on the secondary side. - TDPC2011 supplies power from the primary side via bus power. No external power supply is necessary. The current supply to the secondary side is up to 300mA. Devices with a power consumption greater than 300mA (1.5W) should not use TDPC2011; instead, use TDPC2010.

TDPC2010 Specifications

• USB Standard Compatibility: USB 2.0 (supports 1.1 Mbps, 12 Mbps, 480 Mbps)
• Primary Side Current Consumption (No Load): 10mA typical
• Upstream Connector: USB Type-C
• Downstream Connector (Communication): USB Type-A
• Downstream Connector (Power Supply): USB Type-C
• Operating Temperature Range: 0-50°C

Package Contents

• Main unit
• USB cable (Type-A to Type-C)

Search Keywords

USB isolation, USB DAC isolation, USB noise filter, Low-noise USB, Headphone amplifier noise mitigation, Measurement device power noise, ADUM3166, ADUM4166

Related products

Tokyo Devices TDPC2011

USB Isolator, High Speed ​​480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

Tokyo Devices TDSN3820

Power Line Analyzer 100-250V AC Mains Noise Measurement Kit 2.6MHz

TDSN3820 is a USB device and software kit for measuring and visualizing noise contained in 100-250V commercial power supplies.

check Available

In Stock: 3

Qty.

Qty	Price
1	4,680 JPY
10	4,280 JPY
100	3,980 JPY

JPY | USD

English | 日本語

Share on X

Share