All products

The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

Forethumb is a device for entering characters into computers and smartphones using Morse code.

IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.

10W class AC adapter with 12V 1A output. Compatible with Tokyo Devices' 12V input products.

IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.

TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

IW1205K is a power supply kit that can supply USB power 24 hours a day, 365 days a year by combining a solar panel and storage battery. Compatible with single board computers such as Raspberry Pi.

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

The TDFA1104 is a USB-connected, general-purpose 7-segment LED display. It can display arbitrary characters and numbers from Windows or Linux systems, making it ideal as a highly visible display for embedded applications.

IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.

The IWT504-3V3 is a power module that outputs 3.3V stabilized for 24 hours using a combination of solar cells and supercapacitors. Supports output current up to 300mA.

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

Forethumb is a virtual keyboard device that allows you to enter characters into your computer using Morse code. The MD model is equipped with a capacitive touch sensor.

TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.

This is a USB cable that is compatible with various Tokyo Devices products.