All products
Explore applications and specifications to find the right product.
149 products
Page 2 of 8
Most recently updated
-
Tokyo Devices / IWE100-D
Automatic Key Typing Module *Cobito Card*
IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.
-
Tokyo Devices / TDPC2011
USB Isolator, High Speed 480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment
TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.
-
Tokyo Devices / TDFA30303
USB Relay Controller, 3 Contacts, Form C, 10A, 250V AC/24V DC, Bus-Powered
TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.
-
Tokyo Devices / TDSN5200E
General-purpose, USB ToF Laser Distance Meter, Up to 6m, Bus-Powered, with Enclosure
The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.
-
Tokyo Devices / TDPC0205
[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup
The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.
-
Tokyo Devices / TDPW19050
USB Backup Power, UPS, Protection for 5V Power Flicker/Interruption
TDPW19050 is a small UPS for devices powered by USB power. Backs up power from EDLC when USB power is momentarily interrupted.
-
Tokyo Devices / IWS940-DEV
"Muscle Link" USB Electromyography (EMG) Sensor Development Kit
IWS940, The "Muscle Link", is a development kit for creating applications utilizing electromyography (EMG).
-
Tokyo Devices / FT0002-DR
Morse Code Input USB Keyboard "Forethumb" [DR model] Amateur/Ham Radio Keyer Electronic Keyer
Forethumb is a device for entering characters into computers and smartphones using Morse code.
-
Tokyo Devices / FT0004-MD
Morse Code Input USB Keyboard "Forethumb" with Touch Sensor [MD model] Amateur/Ham Radio Keyer Electronic Keyer
Forethumb is a virtual keyboard device that allows you to enter characters into your computer using Morse code. The MD model is equipped with a capacitive touch sensor.
-
Tokyo Devices / IWT2010-CS
USB Isolator and Noise Filter, USB2.0 12Mbps Full Speed
This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.
-
Generic / IWERD-R3
Disposable electrodes, Large size, For biopotential experiments, Pack of 50
実験用のディスポ電極(使い捨て電極)です。筋電位、脳波、眼振など生体電位の実験・開発に汎用的に利用できます。
-
Tokyo Devices / IWT120-USB
General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power
USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.
-
Tokyo Devices / TDFA30301
USB Relay Controller, 1 Contact, Form C, 10A, 250V AC/24V DC, Bus-Powered
TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.
-
Generic / TDAC-PS6V1A8
AC/DC adapter 6V 1.8A, compatible with Tokyo Devices products
10W class AC adapter with 6V 1.8A output. Compatible with Tokyo Devices' 6V input products.
-
Tokyo Devices / TDFA60220
4-20mA to USB, Analog Current Signal A/D Converter, Galvanic Isolation, Bus-Powered
The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).
-
Tokyo Devices / TDCS023
Enclosure for Tokyo Devices products with flange
This enclosure is compatible with various module products from Tokyo Devices. It comes with a flange, making it easy to attach to a wall or board. Flame-retardant ABS (UL94V-0 compliant)
-
Tokyo Devices / TDCS002
Compatible with Tokyo Devices products, general purpose metal case, dual side open type
東京デバイセズ製品に対応した金属ケースです。両側が開口しているタイプです。
-
FTDI / TTL-232R-5V
USB to TTL, Serial Communication Cable, 5V
This cable converts 5V serial signals into a USB serial port.
-
Tokyo Devices / IW8955-CN3
Mini Blade Fuse Holder, 3 Channels
This is a board for easily wiring fuses. Compatible with mini-blade fuses commonly used in automobiles.
-
Tokyo Devices / TDPC2010
USB Isolator, High Speed 480Mbps, External Power, Noise Filtering for Audio and Measuring Equipment
TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.