Tokyo Devices TDPW6705-144
The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.
Tokyo Devices TDPW19050
TDPW19050 is a small UPS for devices powered by USB power. Backs up power from EDLC when USB power is momentarily interrupted.
![Milliohm Meter, Battery Tester, Internal Resistance Meter, I2C Bus, 1.0-1500mΩ, 2.7-16V [Connector Type]](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBbUFDIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--ca69b22f2ebc37d51056bf32147aea1c72348e33/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/IW7817-CS-1.jpg "Milliohm Meter, Battery Tester, Internal Resistance Meter, I2C Bus, 1.0-1500mΩ, 2.7-16V [Connector Type]")
Tokyo Devices IW7817-CS
IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.
Tokyo Devices IWT2010-CS
This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.
Tokyo Devices TDFA60250
TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).
Tokyo Devices TDSN3820
TDSN3820 is a USB device and software kit for measuring and visualizing noise contained in 100-250V commercial power supplies.
Tokyo Devices IWT504-3V3
The IWT504-3V3 is a power module that outputs 3.3V stabilized for 24 hours using a combination of solar cells and supercapacitors. Supports output current up to 300mA.
Tokyo Devices IW1608-AL
The IW1608-AL is a low-priced version that has the same functions as the IW1608-AX, but without the LCD screen.
Tokyo Devices TDFA6075P
TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.
Tokyo Devices IWS900-AD
IWS900-AD is an Arduino shield that detects heartbeat (pulse) from your fingertips. You can develop devices that are linked to heartbeat.
Tokyo Devices IW1608-AX
IW1608-AX is a control module that uses MPPT control to charge solar panel power into a 12V lead-acid battery with high efficiency. Equipped with an LCD screen that displays current, voltage, charging status, etc. in an easy-to-understand manner.
Tokyo Devices IWT120-USB
USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.
!["EveryUSB" USB power, Intermittent Boot with RTC, Battery powered [Evaluation kit]](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBczBDIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--564ab098f5fe2db09f8b78a7325258564f01b753/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/IWT2525-KIT.jpg "\"EveryUSB\" USB power, Intermittent Boot with RTC, Battery powered [Evaluation kit]")
Tokyo Devices IWT2525-KIT
EveryUSB is a power supply module that allows USB devices such as Raspberry Pi to be powered for long periods of time by batteries. If you set the startup conditions, it will start at regular intervals.
![USB Electromyography (EMG) Sensor Development Kit, 'Muscle Link' [PCB]](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBc0VCIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--de796b0eaa48896cad0518541d28d2d376361629/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/IWS940-PCB-1.jpg "USB Electromyography (EMG) Sensor Development Kit, 'Muscle Link' [PCB]")
Tokyo Devices IWS940-PCB
IWS940-PCB is a myoelectric sensor PCB module. You can create your own hardware that utilizes myoelectric potential.
Tokyo Devices TDSN604A8
TDSN604A8 is a general-purpose, high-precision current sensor/ammeter. It is compatible with Windows and Linux, and can obtain real-time current values in the range of ±0.8A.
Tokyo Devices IW1205K-1209
IW1205K is a power supply kit that can supply USB power 24 hours a day, 365 days a year by combining a solar panel and storage battery. Compatible with single board computers such as Raspberry Pi.
Tokyo Devices IWS600-CM
IWS600-CM is a human presence sensor that can detect movements up to approximately 5 meters away. It is easily integrated into custom systems since values can be obtained via control commands.
Tokyo Devices IWS600-KY
IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.
Tokyo Devices IW7817-EVB
This kit includes a USB connection motherboard, cable, recording software, etc. for evaluating and developing the internal resistance measurement module IW7817-CS.
Tokyo Devices TDSN450
The TDSN450 is an infrared proximity sensor that detects whether there is an object in front of the sensor. Control commands are provided for operation on Windows/Linux.