All products

TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

IW1208-YL2 is a power board that can operate lights, pumps, and other devices in places without commercial power sources by combining solar panels and batteries. It features extensive customization options, including setting the charging voltage.

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

This is a USB cable that is compatible with various Tokyo Devices products.

The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

IWS940, The "Muscle Link", is a development kit for creating applications utilizing electromyography (EMG).

TDPW19050 is a small UPS for devices powered by USB power. Backs up power from EDLC when USB power is momentarily interrupted.

The IWT1310-USB is a general purpose volume style input device. The position of the knob can be easily obtained using a numerical value from 0 to 255.

IW7901 is a phase detection experiment module based on inductance measurement. It is equipped with the basic functions of a lock-in amplifier, such as reference signal generation, lock-in, and signal amplification.

This board module reads 5-24 V digital voltage signals via Modbus. It can be read easily from PLCs, industrial PCs, and similar host devices.

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.

TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.

TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.