Categories▼
  • info Shopping Info.
  • mail Contact
  • memory Product Customization
  • shopping_cart Cart 0
  • Sign in
  • Sign up

← Previous 1 2 3 4 5 6 7 8 Next →

Air Analyzer 2: USB, CO2 (carbon dioxide) concentration, temperature and humidity sensor, 400-5,000ppm
Tokyo Devices TDSN7300
Air Analyzer 2: USB, CO2 (carbon dioxide) concentration, temperature and humidity sensor, 400-5,000ppm
"Air Analyzer 2" is a highly accurate temperature, humidity, and CO2 (carbon dioxide) gas concentration sensor. Operates on USB bus power. Ideal for recording on a PC or implementing into user applications.
USB Relay Controller, 1 Contact, Form C, 10A, 250V AC/24V DC, Bus-Powered
Tokyo Devices TDFA30301
USB Relay Controller, 1 Contact, Form C, 10A, 250V AC/24V DC, Bus-Powered
TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.
USB Backup Power, UPS, Protection for 5V Power Flicker/Interruption
Tokyo Devices TDPW19050
USB Backup Power, UPS, Protection for 5V Power Flicker/Interruption
TDPW19050 is a small UPS for devices powered by USB power. Backs up power from EDLC when USB power is momentarily interrupted.
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA6032A
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.
0-5V/1-5V to USB, Analog Voltage Signal A/D Converter, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA60250
0-5V/1-5V to USB, Analog Voltage Signal A/D Converter, Galvanic Isolation, Bus-Powered
TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
EASEL ES920LR3
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).
RS232C Serial Relay Controller, 3 Form C , 6A 250VAC 28VDC max., 24V Power
Tokyo Devices TDFA30203-24V
RS232C Serial Relay Controller, 3 Form C , 6A 250VAC 28VDC max., 24V Power
A simple RS232C controlled relay board. Can turn on/off voltages up to 250V AC/28V DC and currents up to 6A.
Supercapacitor, solar panel powered, 3.3V output, regulated power supply module
Tokyo Devices IWT504-3V3
Supercapacitor, solar panel powered, 3.3V output, regulated power supply module
The IWT504-3V3 is a power module that outputs 3.3V stabilized for 24 hours using a combination of solar cells and supercapacitors. Supports output current up to 300mA.
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
Tokyo Devices IW12051-BP
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.
Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.6V output, 4A, CVCC
Tokyo Devices TDPW6705-146
Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.6V output, 4A, CVCC
The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.6V charging voltage type.
General-Purpose High-Precision USB Temperature, Humidity, and Pressure Sensor, -40 to 125°C, 0 to 100%RH, 260 to 1,260hPa, Bus Powered
Tokyo Devices TDSN7200
General-Purpose High-Precision USB Temperature, Humidity, and Pressure Sensor, -40 to 125°C, 0 to 100%RH, 260 to 1,260hPa, Bus Powered
TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.
[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup
Tokyo Devices TDPC0205
[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup
The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.
1CH 4–20 mA Analog Signal Input Modbus RTU Board, 12V/24V Power Supply, Isolated RS-485
Tokyo Devices TDMB60220
1CH 4–20 mA Analog Signal Input Modbus RTU Board, 12V/24V Power Supply, Isolated RS-485
This board module reads 4–20 mA analog current signals via Modbus RTU. It can be easily accessed from PLCs, industrial PCs, and other host devices.
915MHz Dipole Antenna for ES920LR Series
EASEL ES920ANT
915MHz Dipole Antenna for ES920LR Series
This antenna is compatible with the external antenna type of the ES920LR series.
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm
EASEL ES920H3
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm
IW7300 Replacement Thermistor (Pack of 5)
Generic NXFT15XH103FA2B025
IW7300 Replacement Thermistor (Pack of 5)
IW7300 Replacement Thermistor.
General Purpose USB Proximity Sensor, Infrared reflection, for Object Detection, Max. Distance 10cm
Tokyo Devices TDSN450
General Purpose USB Proximity Sensor, Infrared reflection, for Object Detection, Max. Distance 10cm
The TDSN450 is an infrared proximity sensor that detects whether there is an object in front of the sensor. Control commands are provided for operation on Windows/Linux.
Enclosure for Tokyo Devices products with flange
Tokyo Devices TDCS023
Enclosure for Tokyo Devices products with flange
This enclosure is compatible with various module products from Tokyo Devices. It comes with a flange, making it easy to attach to a wall or board. Flame-retardant ABS (UL94V-0 compliant)
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Wire Antenna Type] [Single Module]
EASEL ES920LR3A1
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Wire Antenna Type] [Single Module]
ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).
USB Digital Output Board, 7 Channels, 12/24V Output, Current Sink Output, Bus-powered
Tokyo Devices TDFA50507
USB Digital Output Board, 7 Channels, 12/24V Output, Current Sink Output, Bus-powered
TDFA50507 is a 7-channel USB digital IO output board. 12/24V signals can be output to various devices with simple commands. With electrically isolation it has safety and noise resistance.

← Previous 1 2 3 4 5 6 7 8 Next →

Categories

Photovoltaics

  Uninterruptible Power Kit

  Battery Chargers (MPPT)

  Battery Chargers (PWM)

Power Supplies

  Step Up Converter

  Step Down Converter

Batteries

  Battery Chargers

  Battery Testers

  Battery Protectors

Ultra Capacitors

Analog I/O

Relay and Digital I/O

Modbus

LPWA(LoRa)

Tool and Controllers

Temperature Sensors

Weight Sensors

Position Sensors

Light & Infrared Sensors

Accelerometers

Organic Sensors

  EMG and ECG

  SpO2

  Infrared

LED Controllers

Audio and Acoustic

PC peripherals

Measurements

  Impedance

  Thermal Resistance

  Inner Resistance

HAM Radio

Arduino and Shields

Accessories

Enclosures

/items?tag=special

Currency:
|
  Language: English | 日本語
Copyright © 2011-2026 Tokyo Devices, Inc. All rights reserved.