Categories▼
  • info Shopping Info.
  • mail Contact
  • memory Product Customization
  • shopping_cart Cart 0
  • Sign in
  • Sign up

← Previous 1 2 3 4 5 6 7 8 Next →

Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.4V output, 4A, CVCC
Tokyo Devices TDPW6705-144
Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.4V output, 4A, CVCC
The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.
Modbus 1CH 4-20 mA Analog Signal Input Board, 12V/24V Power Supply, Isolated RS-485
Tokyo Devices TDMB60220
Modbus 1CH 4-20 mA Analog Signal Input Board, 12V/24V Power Supply, Isolated RS-485
This board module reads 4–20 mA analog current signals via Modbus RTU. It can be easily accessed from PLCs, industrial PCs, and other host devices.
Mini Blade Fuse Holder, 3 Channels
Tokyo Devices IW8955-CN3
Mini Blade Fuse Holder, 3 Channels
This is a board for easily wiring fuses. Compatible with mini-blade fuses commonly used in automobiles.
General-purpose, USB ToF Laser Distance Meter, Up to 6m, Bus-Powered
Tokyo Devices TDSN5200
General-purpose, USB ToF Laser Distance Meter, Up to 6m, Bus-Powered
The TDSN5200 is a distance sensor equipped with the latest ToF element by STMicroelectronics, Inc. Although extremely compact, it can measure the distance to an object from 1cm up to 6m.
General-purpose Boost Power Supply, Variable Output Voltage, Input 3.3-20V, Output Max. 24V, Max. Current 5A
Tokyo Devices IW1270-X5
General-purpose Boost Power Supply, Variable Output Voltage, Input 3.3-20V, Output Max. 24V, Max. Current 5A
IW1270-X5 is a step-up power supply module that supports a maximum switching current of 5A. It supports an input voltage of 3.3-20V, and the output voltage can be set arbitrarily from the input voltage to a maximum of 24V.
"EveryUSB" USB power, Intermittent Boot with RTC, Battery powered [Evaluation kit]
Tokyo Devices IWT2525-KIT
"EveryUSB" USB power, Intermittent Boot with RTC, Battery powered [Evaluation kit]
EveryUSB is a power supply module that allows USB devices such as Raspberry Pi to be powered for long periods of time by batteries. If you set the startup conditions, it will start at regular intervals.
USB Relay controller, 8 Contacts, Form C, 6A 250V, 12V Power
Tokyo Devices IWT313-USB
USB Relay controller, 8 Contacts, Form C, 6A 250V, 12V Power
IWT313-USB is a relay control module with USB connection. Compatible with on/off of DC12V, DC24V, AC 100V, etc. It can be easily controlled from Windows or Linux using a dedicated command line interface.
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
Tokyo Devices IW12051-BP
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.
AC/DC adapter 12V 1A, Compatible with Tokyo Devices Products
Tokyo Devices IWAC12-1.0
AC/DC adapter 12V 1A, Compatible with Tokyo Devices Products
10W class AC adapter with 12V 1A output. Compatible with Tokyo Devices' 12V input products.
ES920LRSDK1 Additional Module [Ext. Antenna Type]
EASEL ES920LRB
ES920LRSDK1 Additional Module [Ext. Antenna Type]
This is an ES920LR module with a pin header attached so that it can be installed on the ES920LRSDK1 development/evaluation board. u.fl connector type. This is an addition/spare for ES920LRSDK1.
1-5V Input, 4-20mA Output, 2-wire Current Sink, Analog Signal Converter
Tokyo Devices TDFA6075P
1-5V Input, 4-20mA Output, 2-wire Current Sink, Analog Signal Converter
TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.
High-Efficiency Solar Charger, 12V Lead-Acid Battery, 10A, MPPT, LCD Display
Tokyo Devices IW1618-GX
High-Efficiency Solar Charger, 12V Lead-Acid Battery, 10A, MPPT, LCD Display
IW1618-GX is a control board that uses MPPT control to charge solar panel power into a 12V lead-acid battery with high efficiency. Equipped with an LCD screen that displays current, voltage, charging status, etc. in an easy-to-understand manner.
USB Cable Type A to Type B Mini 1.5m Compatible for Tokyo Devices Products
Tokyo Devices TDAC-USB2B1M5
USB Cable Type A to Type B Mini 1.5m Compatible for Tokyo Devices Products
This is a USB cable that is compatible with various Tokyo Devices products.
Morse Code Input USB Keyboard "Forethumb" with Touch Sensor [MD model] Amateur/Ham Radio Keyer Electronic Keyer
Tokyo Devices FT0004-MD
Morse Code Input USB Keyboard "Forethumb" with Touch Sensor [MD model] Amateur/Ham Radio Keyer Electronic Keyer
Forethumb is a virtual keyboard device that allows you to enter characters into your computer using Morse code. The MD model is equipped with a capacitive touch sensor.
Over-discharge Protector 10A Compatible with 12V Lead-Acid Batteries
Tokyo Devices IW8990-C12
Over-discharge Protector 10A Compatible with 12V Lead-Acid Batteries
IW8990-C12 is a module that prevents over-discharge of 12V lead-acid batteries.
“Reset Master” USB watchdog/power reset device
Tokyo Devices TDPC0201
“Reset Master” USB watchdog/power reset device
"Reset Master" is a dedicated USB device for reliably resetting your PC when something goes wrong with your PC. It is used by attaching it to the reset button pin on the PC motherboard.
USB Electromyography (EMG) Sensor Development Kit, 'Muscle Link' [PCB]
Tokyo Devices IWS940-PCB
USB Electromyography (EMG) Sensor Development Kit, 'Muscle Link' [PCB]
IWS940-PCB is a myoelectric sensor PCB module. You can create your own hardware that utilizes myoelectric potential.
Automatic Key Typing Module *Cobito Card*
Tokyo Devices IWE100-D
Automatic Key Typing Module *Cobito Card*
IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.
General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power
Tokyo Devices IWT120-USB
General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power
USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.
"IR shield" Infrared Remote Control and Home Appliance Operation Arduino shield
Tokyo Devices IW74IR-AR
"IR shield" Infrared Remote Control and Home Appliance Operation Arduino shield
IW74IR is an expansion shield that adds infrared transmission and reception functionality to Arduino. You can operate home appliances such as TVs, air conditioners, and lights, and conversely, use the remote control of home appliances to operate Arduino.

← Previous 1 2 3 4 5 6 7 8 Next →

Categories

Photovoltaics

  Uninterruptible Power Kit

  Battery Chargers (MPPT)

  Battery Chargers (PWM)

Power Supplies

  Step Up Converter

  Step Down Converter

Batteries

  Battery Chargers

  Battery Testers

  Battery Protectors

Ultra Capacitors

Analog I/O

Relay and Digital I/O

Modbus

LPWA(LoRa)

Tool and Controllers

Temperature Sensors

Weight Sensors

Position Sensors

Light & Infrared Sensors

Accelerometers

Organic Sensors

  EMG and ECG

  SpO2

  Infrared

LED Controllers

Audio and Acoustic

PC peripherals

Measurements

  Impedance

  Thermal Resistance

  Inner Resistance

HAM Radio

Arduino and Shields

Accessories

Enclosures

/items?tag=special

Currency:
|
  Language: English | 日本語
Copyright © 2011-2026 Tokyo Devices, Inc. All rights reserved.