All products

This antenna is compatible with the external antenna type of the ES920LR series.

IW1608-AX is a control module that uses MPPT control to charge solar panel power into a 12V lead-acid battery with high efficiency. Equipped with an LCD screen that displays current, voltage, charging status, etc. in an easy-to-understand manner.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.

TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).

TDFA50507 is a 7-channel USB digital IO output board. 12/24V signals can be output to various devices with simple commands. With electrically isolation it has safety and noise resistance.

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

IWS940, The "Muscle Link", is a development kit for creating applications utilizing electromyography (EMG).

IW8990-C12 is a module that prevents over-discharge of 12V lead-acid batteries.

TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.

TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

IWS600-CM is a human presence sensor that can detect movements up to approximately 5 meters away. It is easily integrated into custom systems since values can be obtained via control commands.

A general-purpose distance sensor with USB connection. Ultrasonic waves measure the distance to an object 0.3 to 5 meters in front of you in real time. Free development software makes it easy to integrate into your system.

IWS660-CS is a general-purpose illuminance sensor that operates via USB connection. You can easily capture the ambient brightness in lux units onto your computer. Compatible with Windows/Linux.

This is a K-type thermocouple probe compatible with the Tokyo Devices TDSN7400. It can measure temperatures ranging from -40 to 510°C, making it ideal for measuring liquids, gases, and surface temperatures.

This is a USB cable that is compatible with various Tokyo Devices products.

TDFA60350 is an analog output unit that outputs a 0-5V voltage signal from USB. Output voltage can be controlled in 4,096 steps using control commands compatible with Windows and Linux.