All products

IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.

TDSN604A8 is a general-purpose, high-precision current sensor/ammeter. It is compatible with Windows and Linux, and can obtain real-time current values ​​in the range of ±0.8A DC.

This is a USB cable that is compatible with various Tokyo Devices products.

"Reset Master" is a dedicated USB device for reliably resetting your PC when something goes wrong with your PC. It is used by attaching it to the reset button pin on the PC motherboard.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.

TDFA60350 is an analog output unit that outputs a 0-5V voltage signal from USB. Output voltage can be controlled in 4,096 steps using control commands compatible with Windows and Linux.

TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.

A general-purpose distance sensor with USB connection. Ultrasonic waves measure the distance to an object 0.3 to 5 meters in front of you in real time. Free development software makes it easy to integrate into your system.

TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

IWT1320-USB is a general-purpose slider type input device. You can get the position of the knob in 256 steps. Compatible with Windows and Linux.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.

Forethumb is a device for entering characters into computers and smartphones using Morse code.

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

IW1208-YL2 is a power board that can operate lights, pumps, and other devices in places without commercial power sources by combining solar panels and batteries. It features extensive customization options, including setting the charging voltage.