All products

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

TDFA60350 is an analog output unit that outputs a 0-5V voltage signal from USB. Output voltage can be controlled in 4,096 steps using control commands compatible with Windows and Linux.

The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.

TDSN7200 is a general-purpose RS232C/Serial sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time.

TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).

USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.

IWS660-CS is a general-purpose illuminance sensor that operates via USB connection. You can easily capture the ambient brightness in lux units onto your computer. Compatible with Windows/Linux.

This enclosure is compatible with various module products from Tokyo Devices. It comes with a flange, making it easy to attach to a wall or board. Flame-retardant ABS (UL94V-0 compliant)

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.

This is an antenna (waterproof) compatible with the external antenna type of the ES920LR series.

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

A general-purpose distance sensor with USB connection. Ultrasonic waves measure the distance to an object 0.3 to 5 meters in front of you in real time. Free development software makes it easy to integrate into your system.

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

Milliohm meter using the AC four-terminal method, ideal for monitoring battery degradation.

ES920LR3は、最新のSTM32WL（RF+MCUが1チップ）を搭載した、EASEL社第3世代の920MHz帯無線モジュールです。

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.