Products of Tokyo Devices (1)

Tokyo Devices IW7817-CS

Milliohm Meter, Battery Tester, Internal Resistance Meter, I2C Bus, 1.0-1500mΩ, 2.7-16V [Connector Type]

IW7817 is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

Tokyo Devices IWS660-CS

USB Light Meter, Lux Meter, Illuminance Meter, Bus-Powered, 10 to 60,000 Lx

IWS660-CS is a general-purpose illuminance sensor that operates via USB connection. You can easily capture the ambient brightness in lux units onto your computer. Compatible with Windows/Linux.

Tokyo Devices IWT303-3C

USB bus powered, Relay controller, 3 contacts Form C, 10A 250V

A general-purpose USB-controlled relay module. 12V, 24V, AC 100V, etc. can be turned on and off via USB. A free control command line program is available.

Tokyo Devices IWE100-D

Automatic Key Typing Module *Cobito Card*

IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.

Tokyo Devices TDFA50507

USB Digital Output Board, 7 Channels, 12/24V Output, Current Sink Output, Bus-powered

TDFA50507 is a 7-channel USB digital IO output board. 12/24V signals can be output to various devices with simple commands. With electrically isolation it has safety and noise resistance.

Tokyo Devices TDFA30608

Isolated Digital Input Board 8 Channels 5/12/24V Input Current Source/Sink USB Bus-powered

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

Tokyo Devices IWT120-USB

General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power

USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.

Tokyo Devices TDSN7200

General-Purpose High-Precision USB Temperature, Humidity, and Pressure Sensor, -40 to 125°C, 0 to 100%RH, 260 to 1,260hPa, Bus Powered

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

Tokyo Devices IWS940-PCB

USB Electromyography (EMG) Sensor Development Kit, 'Muscle Link' [PCB]

IWS940-PCB is a myoelectric sensor PCB module. You can create your own hardware that utilizes myoelectric potential.

Tokyo Devices TDPC2011

USB Isolator, High Speed 480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment

TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.

Tokyo Devices IW1208-YL2

Solar Battery Charger, 12V Lead Acid Battery, 10A, Voltage Customizable

IW1208-YL2 is a power board that can operate lights, pumps, and other devices in places without commercial power sources by combining solar panels and batteries. It features extensive customization options, including setting the charging voltage.

Tokyo Devices TDFA30301

USB Relay Controller, 1 Contact Form C,10A 250V AC 24V DC, Bus-Powered

TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

Tokyo Devices IWT2525-KIT

"EveryUSB" USB power, Intermittent Boot with RTC, Battery powered [Evaluation kit]

EveryUSB is a power supply module that allows USB devices such as Raspberry Pi to be powered for long periods of time by batteries. If you set the startup conditions, it will start at regular intervals.

Tokyo Devices FT0004-MD

Morse Code Input USB Keyboard "Forethumb" with Touch Sensor [MD model] Amateur/Ham Radio Keyer Electronic Keyer

Forethumb is a virtual keyboard device that allows you to enter characters into your computer using Morse code. The MD model is equipped with a capacitive touch sensor.

Tokyo Devices IW7807-BP

Milliohm Meter, Battery Tester, Internal Resistance, 1.0-1500mΩ, 2.7-16V [PCB]

IW7807-BP is a milliohmmeter that can measure extremely small resistances on the order of mΩ. As a battery tester, you can check the deterioration status of lithium-ion batteries, nickel-metal hydride batteries, lead-acid batteries, LiFe batteries, etc.

Tokyo Devices IWS600-KY

General Purpose USB Infrared Motion Detector Bus-Powered (Virtual Keyboard Type)

IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.

Tokyo Devices TDAC-THC1

K-Type Thermocouple Probe for TDSN7400 -40 to 510°C, 1.2m

This is a K-type thermocouple probe compatible with the Tokyo Devices TDSN7400. It can measure temperatures ranging from -40 to 510°C, making it ideal for measuring liquids, gases, and surface temperatures.

Tokyo Devices IWT1320-USB

General Purpose USB Slider Input Device with LED and Buzzer

IWT1320-USB is a general-purpose slider type input device. You can get the position of the knob in 256 steps. Compatible with Windows and Linux.

Tokyo Devices TDFA6075P

1-5V Input, 4-20mA Output, 2-wire Current Sink, Analog Signal Converter

TDFA6075P is an analog signal conversion board that converts 1-5V voltage signals to 4-20mA current signals. Can be used for instrumentation sensors, etc.

Tokyo Devices IWT2010-CS

USB Isolator and Noise Filter, USB2.0 12Mbps Full Speed

This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.

Manufacturer: Tokyo Devices

Categories