All products

TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.

The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.

TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.

IWS940, The "Muscle Link", is a development kit for creating applications utilizing electromyography (EMG).

TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.

TDFA50507 is a 7-channel USB digital IO output board. 12/24V signals can be output to various devices with simple commands. With electrically isolation it has safety and noise resistance.

TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

IWS660-CS is a general-purpose illuminance sensor that operates via USB connection. You can easily capture the ambient brightness in lux units onto your computer. Compatible with Windows/Linux.

TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).

This is a USB cable that is compatible with various Tokyo Devices products.

This is a board for easily wiring fuses. Compatible with mini-blade fuses commonly used in automobiles.

IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.

TDFA30303 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.

The TDSN450 is an infrared proximity sensor that detects whether there is an object in front of the sensor. Control commands are provided for operation on Windows/Linux.

The TDSN7360 is a high-precision 3-axis accelerometer. It can capture acceleration data up to ±2.5g at a maximum rate of 1,000 samples per second.

The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).

USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.

IW8990-C12 is a module that prevents over-discharge of 12V lead-acid batteries.

The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.