Tokyo Devices TDSN3820
TDSN3820 is a USB device and software kit for measuring and visualizing noise contained in 100-250V commercial power supplies.
Tokyo Devices TDFA30303
TDFA30301 is a simple USB-controlled relay board. It allows you to switch 12/24VDC, or 100/250VAC loads via USB. It can be controlled from both Windows and Linux.
Tokyo Devices TDSN7200
TDSN7200 is a general-purpose USB sensor that can measure temperature, humidity, and air pressure. Data can be imported into a PC in real time using control commands compatible with Windows and Linux.
Tokyo Devices IWT2010-CS
This is an isolator that electrically isolates USB2.0 signals. The low-noise design makes it ideal for USB-connected instruments and audio devices.
EASEL ES920ANT-3
This is an antenna (waterproof) compatible with the external antenna type of the ES920LR series.
EASEL ES920ANT
This antenna is compatible with the external antenna type of the ES920LR series.
![Morse Code Input USB Keyboard "Forethumb" [DR model] Amateur/Ham Radio Keyer Electronic Keyer](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBbDRDIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--d6ca01e8f81fcc0483158ad1e80ea6745b174090/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/FT0002-TK2-1.jpg "Morse Code Input USB Keyboard \"Forethumb\" [DR model] Amateur/Ham Radio Keyer Electronic Keyer")
Tokyo Devices FT0002-DR
Forethumb is a device for entering characters into computers and smartphones using Morse code.
Tokyo Devices TDPC2011
TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.
![[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup](/rails/active_storage/representations/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBaFlJIiwiZXhwIjpudWxsLCJwdXIiOiJibG9iX2lkIn19--3168af524a453a908c379aaa2a7d21f9c5d9da07/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCem9MWm05eWJXRjBTU0lJYW5CbkJqb0dSVlE2QzNKbGMybDZaVWtpRERFMk1IZ3hOakFHT3daVSIsImV4cCI6bnVsbCwicHVyIjoidmFyaWF0aW9uIn19--c12d042a61b6f2167e79f63ed0ca8f8186aa3449/PXL_20240124_045340476.jpg "[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup")
Tokyo Devices TDPC0205
The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.
Tokyo Devices IWE100-D
IWE100 is a virtual USB keyboard device that plays back pre-recorded keystrokes.
Tokyo Devices TDSN604A8
TDSN604A8 is a general-purpose, high-precision current sensor/ammeter. It is compatible with Windows and Linux, and can obtain real-time current values in the range of ±0.8A.
Tokyo Devices IWS600-KY
IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.
Tokyo Devices TDSN5200E
The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.
Tokyo Devices TDPC2010
TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.
Tokyo Devices IWT313-USB
IWT313-USB is a relay control module with USB connection. Compatible with on/off of DC12V, DC24V, AC 100V, etc. It can be easily controlled from Windows or Linux using a dedicated command line interface.
Tokyo Devices IWT120-USB
USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.
Tokyo Devices TDSN450
The TDSN450 is an infrared proximity sensor that detects whether there is an object in front of the sensor. Control commands are provided for operation on Windows/Linux.