Categories▼
  • info Shopping Info.
  • mail Contact
  • memory Product Customization
  • shopping_cart Cart 0
  • Sign in
  • Sign up

← Previous 1 2 3 4 5 6 7 8 Next →

4-20mA to USB, Analog Current Signal A/D Converter, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA60220
4-20mA to USB, Analog Current Signal A/D Converter, Galvanic Isolation, Bus-Powered
The TDFA60220 is a USB current meter designed for recording and processing 4-20mA analog current signals. It can capture current values in real-time on a PC with a resolution of 12 bits (4,096 levels).
USB Isolator, High Speed ​​480Mbps, External Power, Noise Filtering for Audio and Measuring Equipment
Tokyo Devices TDPC2010
USB Isolator, High Speed ​​480Mbps, External Power, Noise Filtering for Audio and Measuring Equipment
TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm waterproof
EASEL ES920H4
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm waterproof
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm
EASEL ES920H3
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
EASEL ES920LR3
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).
LoRaWAN and Private LoRa Communication Module [Ext. Antenna Type]
EASEL ES920LR
LoRaWAN and Private LoRa Communication Module [Ext. Antenna Type]
This is a communication module for LPWA "LoRa (LoRaWAN)", which is a hot topic as the next generation IoT technology. Power-saving communication over several kilometers is possible.
LoRaWAN and Private LoRa Communication Module [Wire Antenna Type]
EASEL ES920LRA1
LoRaWAN and Private LoRa Communication Module [Wire Antenna Type]
This is a communication module for LPWA "LoRa (LoRaWAN)", which is a hot topic as the next generation IoT technology. Power-saving communication over several kilometers is possible.
920MHz dipole antenna waterproof for ES920LR series
EASEL ES920ANT-3
920MHz dipole antenna waterproof for ES920LR series
This is an antenna (waterproof) compatible with the external antenna type of the ES920LR series.
EASEL ES920LR2A1
USB Light Meter, Lux Meter, Illuminance Meter, Bus-Powered, 10 to 60,000 Lx
Tokyo Devices IWS660-CS
USB Light Meter, Lux Meter, Illuminance Meter, Bus-Powered, 10 to 60,000 Lx
IWS660-CS is a general-purpose illuminance sensor that operates via USB connection. You can easily capture the ambient brightness in lux units onto your computer. Compatible with Windows/Linux.
Air Analyzer 2: USB, CO2 (carbon dioxide) concentration, temperature and humidity sensor, 400-5,000ppm
Tokyo Devices TDSN7300
Air Analyzer 2: USB, CO2 (carbon dioxide) concentration, temperature and humidity sensor, 400-5,000ppm
"Air Analyzer 2" is a highly accurate temperature, humidity, and CO2 (carbon dioxide) gas concentration sensor. Operates on USB bus power. Ideal for recording on a PC or implementing into user applications.
General Purpose USB Thermocouple Temperature Sensor K type -40 to 1200℃ Galvanic Isolation Bus-Powered
Tokyo Devices TDSN7400
General Purpose USB Thermocouple Temperature Sensor K type -40 to 1200℃ Galvanic Isolation Bus-Powered
TDSN7400 is a USB temperature sensor that supports K-type thermocouples. It can measure temperatures in the range of -40 to 1200°C from Windows & Linux.
K-Type Thermocouple Probe for TDSN7400 -40 to 510°C, 1.2m
Tokyo Devices TDAC-THC1
K-Type Thermocouple Probe for TDSN7400 -40 to 510°C, 1.2m
This is a K-type thermocouple probe compatible with the Tokyo Devices TDSN7400. It can measure temperatures ranging from -40 to 510°C, making it ideal for measuring liquids, gases, and surface temperatures.
General Purpose Infrared Motion Detector Bus-Powred (Command Control Type)
Tokyo Devices IWS600-CM
General Purpose Infrared Motion Detector Bus-Powred (Command Control Type)
IWS600-CM is a human presence sensor that can detect movements up to approximately 5 meters away. It is easily integrated into custom systems since values can be obtained via control commands.
Mini Blade Fuse Holder, 3 Channels
Tokyo Devices IW8955-CN3
Mini Blade Fuse Holder, 3 Channels
This is a board for easily wiring fuses. Compatible with mini-blade fuses commonly used in automobiles.
General Purpose USB Infrared Motion Detector Bus-Powered (Virtual Keyboard Type)
Tokyo Devices IWS600-KY
General Purpose USB Infrared Motion Detector Bus-Powered (Virtual Keyboard Type)
IWS600-KY is an infrared motion detector that works as a virtual USB keyboard. Virtual keys are pressed by the movement of a heat source up to approximately 5 meters away.
USB Isolator, High Speed ​​480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment
Tokyo Devices TDPC2011
USB Isolator, High Speed ​​480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment
TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA6032A
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.
“Reset Master” USB watchdog/power reset device
Tokyo Devices TDPC0201
“Reset Master” USB watchdog/power reset device
"Reset Master" is a dedicated USB device for reliably resetting your PC when something goes wrong with your PC. It is used by attaching it to the reset button pin on the PC motherboard.
[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup
Tokyo Devices TDPC0205
[Clock Dongle] a USB Real-Time Clock, Current Time Sync., Battery Backup
The "Clock Dongle" is a simple Real-Time Clock (RTC) that allows you to obtain the current time via USB. It is used in conjunction with computers that do not have their own clocks, such as Raspberry Pi.

← Previous 1 2 3 4 5 6 7 8 Next →

Categories

Photovoltaics

  Uninterruptible Power Kit

  Battery Chargers (MPPT)

  Battery Chargers (PWM)

Power Supplies

  Step Up Converter

  Step Down Converter

Batteries

  Battery Chargers

  Battery Testers

  Battery Protectors

Ultra Capacitors

Analog I/O

Relay and Digital I/O

Modbus

LPWA(LoRa)

Tool and Controllers

Temperature Sensors

Weight Sensors

Position Sensors

Light & Infrared Sensors

Accelerometers

Organic Sensors

  EMG and ECG

  SpO2

  Infrared

LED Controllers

Audio and Acoustic

PC peripherals

Measurements

  Impedance

  Thermal Resistance

  Inner Resistance

HAM Radio

Arduino and Shields

Accessories

Enclosures

/items?tag=special

Currency:
|
  Language: English | 日本語
Copyright © 2011-2026 Tokyo Devices, Inc. All rights reserved.