Categories▼
  • info Shopping Info.
  • mail Contact
  • memory Product Customization
  • shopping_cart Cart 0
  • Sign in
  • Sign up

← Previous 1 2 3 4 5 6 7 8 Next →

Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.4V output, 4A, CVCC
Tokyo Devices TDPW6705-144
Universal battery charging board, LFP, Lithium iron phosphate, LiFePo4, lead acid, deep cycle battery, 24V input, 14.4V output, 4A, CVCC
The TDPW6705 series is a small, highly efficient embedded charging board that is compatible with LFP(LiFePo4) and lead-acid batteries. It fully charges a 20Ah battery in about 3 hours. This is a 14.4V charging voltage type.
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA6032A
USB to 0-20mA/4-20mA Current Signal, Analog Output, Galvanic Isolation, Bus-Powered
TDFA6032A is an analog output unit that outputs a 0-20mA or 4-20mA current signal from the USB port. Output current can be controlled in 2,048 steps using Windows/Linux compatible control commands.
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
Tokyo Devices IW12051-BP
General purpose Solar Charger, Lead-acid Battery, Uninterruptible USB 5V output [PCB]
IW12051 is an uninterruptible power supply that can provide 24-hour USB power by combining a solar panel and battery. Single board computers such as Raspberry Pi and communication equipment can be operated for long periods of time.
Enclosure for Tokyo Devices products with flange
Tokyo Devices TDCS023
Enclosure for Tokyo Devices products with flange
This enclosure is compatible with various module products from Tokyo Devices. It comes with a flange, making it easy to attach to a wall or board. Flame-retardant ABS (UL94V-0 compliant)
Battery over-discharge prevention module Compatible with 24V lead-acid batteries
Tokyo Devices IW8990-C24
Battery over-discharge prevention module Compatible with 24V lead-acid batteries
IW8990-C24 is a module that prevents over-discharge of 24V (12V 2 series) lead-acid batteries.
K-Type Thermocouple Probe for TDSN7400 -40 to 510°C, 1.2m
Tokyo Devices TDAC-THC1
K-Type Thermocouple Probe for TDSN7400 -40 to 510°C, 1.2m
This is a K-type thermocouple probe compatible with the Tokyo Devices TDSN7400. It can measure temperatures ranging from -40 to 510°C, making it ideal for measuring liquids, gases, and surface temperatures.
USB Isolator, High Speed ​​480Mbps, External Power, Noise Filtering for Audio and Measuring Equipment
Tokyo Devices TDPC2010
USB Isolator, High Speed ​​480Mbps, External Power, Noise Filtering for Audio and Measuring Equipment
TDPC2010 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground loop. It is ideal for noise suppression of sound devices and measuring instruments.
0-5V/1-5V to USB, Analog Voltage Signal A/D Converter, Galvanic Isolation, Bus-Powered
Tokyo Devices TDFA60250
0-5V/1-5V to USB, Analog Voltage Signal A/D Converter, Galvanic Isolation, Bus-Powered
TDFA60250 is a USB voltage meter that supports 0-5V and 1-5V analog signals. It can provide real-time data acquisition at a speed of up to 1,000 samples per second with a resolution of 12 bits (4,096 levels).
General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power
Tokyo Devices IWT120-USB
General Purpose, USB, Alarm Lamp and Alarm Buzzer, 83dB, Bus-Power
USB alert device with red rotating LED and loud buzzer. Ideal for servers, factories, and notification systems.
Isolated Digital Input Board 8 Channels 5/12/24V Input Current Source/Sink USB Bus-powered
Tokyo Devices TDFA30608
Isolated Digital Input Board 8 Channels 5/12/24V Input Current Source/Sink USB Bus-powered
TDFA30608 is an 8 channel USB digital IO input board. You can easily read signals from various external devices from your own programs. Because it is electrically insulated, it has excellent safety and noise resistance.
General Purpose USB Slider Input Device with LED and Buzzer
Tokyo Devices IWT1320-USB
General Purpose USB Slider Input Device with LED and Buzzer
IWT1320-USB is a general-purpose slider type input device. You can get the position of the knob in 256 steps. Compatible with Windows and Linux.
USB Cable Type A to Type B Mini 1.5m Compatible for Tokyo Devices Products
Tokyo Devices TDAC-USB2B1M5
USB Cable Type A to Type B Mini 1.5m Compatible for Tokyo Devices Products
This is a USB cable that is compatible with various Tokyo Devices products.
RS232C Serial Relay Controller, 3 Form C , 6A 250VAC 28VDC Max., 12V Power
Tokyo Devices TDFA30203-12V
RS232C Serial Relay Controller, 3 Form C , 6A 250VAC 28VDC Max., 12V Power
A simple RS232C controlled relay board. Can turn on/off voltages up to 250V AC/28V DC and currents up to 6A.
Morse Code Input USB Keyboard "Forethumb" [DR model] Amateur/Ham Radio Keyer Electronic Keyer
Tokyo Devices FT0002-DR
Morse Code Input USB Keyboard "Forethumb" [DR model] Amateur/Ham Radio Keyer Electronic Keyer
Forethumb is a device for entering characters into computers and smartphones using Morse code.
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Wire Antenna Type] [Single Module]
EASEL ES920LR3A1
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Wire Antenna Type] [Single Module]
ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm waterproof
EASEL ES920H4
Antenna coaxial cable for ES920LR series (U.FL-SMA) 100mm waterproof
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
EASEL ES920LR3
Ultra-Low Power LoRa/FSK Comm. Module 3rd Gen. [Ext. Antenna Type] [Single Module]
ES920LR3 is EASEL's 3rd generation 920MHz wireless module equipped with the latest STM32WL (RF + MCU in 1 chip).
920MHz dipole antenna waterproof for ES920LR series
EASEL ES920ANT-3
920MHz dipole antenna waterproof for ES920LR series
This is an antenna (waterproof) compatible with the external antenna type of the ES920LR series.
USB Isolator, High Speed ​​480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment
Tokyo Devices TDPC2011
USB Isolator, High Speed ​​480Mbps, Bus Power, 1.5W/300mA, Noise Filtering for Audio and Measurement Equipment
TDPC2011 is an isolator that supports USB2.0 high speed. It electrically isolates the PC side from the device side and separates the ground potential. It is ideal for noise suppression of sound devices and measuring instruments.
General-purpose, USB ToF Laser Distance Meter, Up to 6m, Bus-Powered, with Enclosure
Tokyo Devices TDSN5200E
General-purpose, USB ToF Laser Distance Meter, Up to 6m, Bus-Powered, with Enclosure
The TDSN5200E is a distance sensor equipped with STMicroelectronics' latest laser measurement device, the VL53L4CX. It can measure distances to a target within a range from 1 cm to a maximum of 6 meters.

← Previous 1 2 3 4 5 6 7 8 Next →

Categories

Photovoltaics

  Uninterruptible Power Kit

  Battery Chargers (MPPT)

  Battery Chargers (PWM)

Power Supplies

  Step Up Converter

  Step Down Converter

Batteries

  Battery Chargers

  Battery Testers

  Battery Protectors

Ultra Capacitors

Analog I/O

Relay and Digital I/O

Modbus

LPWA(LoRa)

Tool and Controllers

Temperature Sensors

Weight Sensors

Position Sensors

Light & Infrared Sensors

Accelerometers

Organic Sensors

  EMG and ECG

  SpO2

  Infrared

LED Controllers

Audio and Acoustic

PC peripherals

Measurements

  Impedance

  Thermal Resistance

  Inner Resistance

HAM Radio

Arduino and Shields

Accessories

Enclosures

/items?tag=special

Currency:
|
  Language: English | 日本語
Terms of Service | Privacy Policy |
Copyright © 2011-2026 Tokyo Devices, Inc. All rights reserved.

We use optional cookies for analytics, advertising measurement, and external content. Essential cookies keep the store, cart, and security features working.

Settings

Could not save your settings. Please try again.